翻訳と辞書
Words near each other
・ 6.3
・ 6.30 with George Negus
・ 6.45×48mm XPL Swiss
・ 6.5 Metre
・ 6.5-06 A-Square
・ 6.5-284 Norma
・ 6.57 Crew
・ 6.5mm
・ 6.5mm Bergmann
・ 6.5mm Creedmoor
・ 6.5mm Grendel
・ 6.5mm Remington Magnum
・ 6.5×25mm CBJ
・ 6.5×47mm Lapua
・ 6.5×50mmSR Arisaka
6.5×52mm Carcano
・ 6.5×53mmR
・ 6.5×54mm Mannlicher–Schönauer
・ 6.5×55mm
・ 6.5×58mm Vergueiro
・ 6.5×68mm
・ 6.8mm Remington SPC
・ 6/16/00 – Katowice, Poland
・ 6/20/00 – Verona, Italy
・ 6/22/00 – Milan, Italy
・ 6/4
・ 6/6/00 – Cardiff, Wales
・ 6/8/00 – Paris, France
・ 60
・ 60 (disambiguation)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

6.5×52mm Carcano : ウィキペディア英語版
6.5×52mm Carcano

The 6.5×52mm Carcano, also known as the 6.5×52mm Parravicini-Carcano or 6.5×52mm Mannlicher–Carcano, is an Italian military 6.5 mm (.268 cal, actually 0.2675 inches) rimless bottle-necked rifle cartridge, developed from 1889 to 1891 and used in the Carcano 1891 rifle and many of its successors. A common synonym in American gun literature is "6.5mm Italian." In American parlance, "Carcano" is frequently added to better distinguish it from the rimmed hunting cartridge 6.5×52mmR (U.S. version: .25-35 Winchester). Ballistically, its performance is very similar to that of the 6.5×54mm Mannlicher–Schönauer.
== Design ==
Under the direction of the "Commissione delle Armi Portatili" (Commission for Portable Weapons), instituted in 1888 to develop a smokeless-powder rifle for the Italian Army, the "Reale Laboratorio Pirotecnico di Bologna" (Royal Pyrotechnical Laboratory of Bologna) developed and tried several different cartridge designs, with a bullet diameter from 8 mm to 6 mm. Finally, due also to the influence of Major Antonio Benedetti, of the Brescia Arsenal, Secretary of the Commission and strong supporter of the advantages of smallbore cartridges, the 6.5×52 cartridge was adopted in March 1890, prior to the adoption of the rifle that used it (the Model 1891 Carcano rifle).
After the adoption of the cartridge, the arsenals technicians worried about the characteristics of the original ballistite load, since that propellant was considered too erosive (flame temperature of 3000-3500 °C) and not stable under severe climatic conditions. Several other loads were tested, including the British cordite but without good results, until the ''Reale Polverificio del Liri'' (Royal Explosives Factory of Liri) developed a new propellant called "Solenite," composed of trinitrocellulose (40%), dinitrocellulose (21%), nitroglycerine (36%), mineral oil (3%), and shaped in large tube-like grains. The new propellant, that reduced the flame temperature to 2600 °C and proved to be very stable, was adopted in 1896 and never changed until the end of the military production of the cartridge.
The 6.5×52mm Carcano was designed as an infantry cartridge. In accordance with the tactics of the time, the adjustable rear sight of the rifle allowed for volley fire up to 2,000 metres. The 6.5×52mm Carcano was the first to be officially adopted of a class of similar smallbore military rifle cartridges which included the 6.5×50mm Arisaka (Japan), 6.5×53mmR Mannlicher (Romania/Netherlands), 6.5×54mm Mannlicher–Schönauer (Greece), 6.5×55mm Swedish Mauser (also Norwegian Krag–Jørgensen), 6.5×58 Portuguese.
A comparison with larger-bore smokeless powder cartridges of the 7- and 8mm calibre class (such as the French 8×50mmR Lebel, the German 7.92×57mm, the Austrian 8×50mmR Mannlicher, the .303 British, the Russian 7.62×54mmR, the Belgian and 7.65×53mm Argentine, the .30-40 Krag, and the much later .30-03 and .30-06 Springfield) may make the 6.5mm rounds appear "underpowered" on paper though, and lacking in stopping power. On the other hand, the small bore cartridges seem to have a long list of advantages, as flatness of trajectory, outstanding penetration at distance, less weight, less recoil, smaller dimensions, and less material required in production.
Its short-lived intended successor cartridge, the 7.35×51mm Carcano, was intended to replace the 6.5 Carcano, but those plans were cancelled due to the logistics difficulties that arose once WWII commenced.
The original 6.5×52mm barrel design, developed by the Brescia Arsenal at the same time as the cartridge before development of the M91 Carcano Rifle itself, used a gain twist barrel with deep rifling to reduce wear, extend barrel life and give consistent accuracy. Gain twist has a slow initial twist in the barrel progressively getting faster until the final twist rate is attained near the muzzle, resulting in less torque being imparted to the bullet during the highest stress phase of the interior ballistic cycle, and thus less barrel wear in the throat of the barrel. Gain twist was phased out in the last production of the Carcano rifle in favour of conventional rifling.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「6.5×52mm Carcano」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.